#Iranelection Cyber Protest Guide

Below are some thoughts on how we can help our brothers and sisters in Iran.

The purpose of this guide is to help you participate constructively in the Iranian election protests through Twitter.

1. Do NOT publicise proxy IP's over twitter, and especially not using the #iranelection hashtag. Security forces are monitoring this hashtag, and the moment they identify a proxy IP they will block it in Iran. If you are creating new proxies for the Iranian bloggers, DM them to @stopAhmadi or @iran09 and they will distribute them discretely to bloggers in Iran.

2. Hashtags, the only two legitimate hashtags being used by bloggers in Iran are #iranelection and #gr88, other hashtag ideas run the risk of diluting the conversation.

3. Keep you bullshit filter up! Security forces are now setting up twitter accounts to spread disinformation by posing as Iranian protesters. Please don't retweet impetuosly, try to confirm information with reliable sources before retweeting. The legitimate sources are not hard to find and follow.

4. Help cover the bloggers: change your twitter settings so that your location is TEHRAN and your time zone is GMT +3.30. Security forces are hunting for bloggers using location and timezone searches. If we all become 'Iranians' it becomes much harder to find them.

5. Don't blow their cover! If you discover a genuine source, please don't publicise their name or location on a website. This is REAL. These bloggers are in REAL danger. Spread the word discretely through your own networks but don't signpost them to the security forces. People are dying there, for real, please keep that in mind...

Austin Heap provides detailed instructions on his site on how to set up a proxy to help the Iranian cause.

Details below. Check Austin's site for troubleshooting:

If you’re using Windows, it’s pretty straight forward to setup a proxy and help give access to those in Iran who are being censored. If you’re running Redhat/CentOS, please use the linux instructions.

1) Download Squid for Windows
2) Extract that zip archive, and move the “squid” folder to the root of your drive (probably C:\).
3) After moving the squid folder, open “C:\squid\etc\squid.conf” in your favorite text editor (not Word).
4) Configure the DNS name servers on the line that says “dns_nameservers” to point at your ISPs DNS servers.
5) Now the fun part, locking access down the just the Iranian IP blocks.

Inside the text editor search (Control-W) for the line “http_access deny all” and change it to “http_access allow all”. This will make your proxy open and accessible to the world. If you would like to limit your proxy to Iranian IP blocks, you want to change “http_access deny all” to read “http_access allow TRUSTED” add a line (BEFORE the http_access line to setup an access control list [ACL]). This ACL line that defines TRUSTED should read:

acl TRUSTED src 62.60.128.0/17 62.193.0.0/19 62.220.96.0/19 77.36.128.0/17 77.77.64.0/18 77.104.64.0/18 77.237.64.0/19 77.237.160.0/19 77.245.224.0/20 78.38.0.0/15 78.109.192.0/20 78.110.112.0/20 78.111.0.0/20 78.154.32.0/19 78.157.32.0/19 78.158.160.0/19 79.127.0.0/17 79.132.192.0/19 79.170.144.0/21 79.175.128.0/18 80.66.176.0/20 80.69.240.0/20 80.71.112.0/20 80.75.0.0/20 80.191.0.0/16 80.242.0.0/20 80.253.128.0/20 80.253.144.0/20 81.12.0.0/17 81.28.32.0/20 81.28.48.0/20 81.31.160.0/20 81.31.176.0/20 81.90.144.0/20 81.91.128.0/20 81.91.144.0/20 82.99.192.0/18 82.115.0.0/19 83.147.192.0/18 84.47.192.0/18 84.241.0.0/18 85.9.64.0/18 85.15.0.0/18 85.133.128.0/17 85.185.0.0/16 85.198.0.0/18 86.109.32.0/19 87.107.0.0/16 87.247.160.0/19 87.248.128.0/19 89.144.128.0/18 89.165.0.0/17 89.221.80.0/20 89.235.64.0/18 91.98.0.0/15 91.184.64.0/19 91.186.192.0/19 91.206.122.0/23 91.208.165.0/24 91.209.242.0/24 91.212.16.0/24 91.212.19.0/24 91.212.252.0/24 92.42.48.0/21 92.50.0.0/18 92.61.176.0/20 92.62.176.0/20 92.242.192.0/19 93.110.0.0/16 93.190.24.0/21 94.74.128.0/18 94.101.128.0/20 94.101.176.0/20 94.101.240.0/20 94.139.160.0/19 94.182.0.0/15 94.184.0.0/17 94.232.168.0/21 94.241.128.0/18 95.38.0.0/16 95.80.128.0/18 95.81.64.0/18 95.82.0.0/18 95.82.64.0/18 95.130.56.0/21 95.130.240.0/21 188.34.0.0/16 188.93.64.0/21 188.121.96.0/19 188.121.128.0/19 188.136.128.0/17 188.158.0.0/15 193.189.122.0/23 194.225.0.0/16 195.146.32.0/19 212.16.64.0/19 212.33.192.0/19 212.50.224.0/19 212.80.0.0/19 212.95.128.0/19 212.120.192.0/19 213.176.0.0/19 213.176.32.0/19 213.176.64.0/18 213.195.0.0/18 213.207.192.0/18 213.217.32.0/19 213.233.160.0/19 217.11.16.0/20 217.24.144.0/20 217.25.48.0/20 217.64.144.0/20 217.66.192.0/20 217.66.208.0/20 217.146.208.0/20 217.172.96.0/19 217.174.16.0/20 217.218.0.0/15

6) Setup “visible_hostname” (normally just the public IP address).
7) Turn off logging by adding these two lines:

access_log none
cache_store_log none

7) Setup the Squid cache by issuing the following command: “c:\squid\sbin\squid -D –z” (No quotes).
Setup Squid to run as a service by issuing the following command: “c:\squid\sbin\squid –i”

Please don’t run this on a machine that you’re worried about or is used for production sites; and take basic security precautions, ie: moving ftp off the default port, using a firewall package, etc.

Once your server is up and running please DM @austinheap and let me know! I will no longer posting proxies on the public list. If you set one up, please e-mail me@austinheap.com to contribute to the private one or e-mail me if your an Iranian that needs access!

More details at:
How to Set Up A Proxy for the Citizens of Iran